Here is the ffmpeglog.txt
btw, i tried to change from 2k resolution to 1080p but doesn't work, and tried from 120 fps to 60 but no result....if i just record a few seconds then it works......any idea?
ffmpeg version 4.4-full_build-www.gyan.dev Copyright (c) 2000-2021 the FFmpeg developers
built with gcc 10.2.0 (Rev6, Built by MSYS2 project)
configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-lzma --enable-libsnappy --enable-zlib --enable-librist --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libdav1d --enable-libzvbi --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxvid --enable-libaom --enable-libopenjpeg --enable-libvpx --enable-libass --enable-frei0r --enable-libfreetype --enable-libfribidi --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libmfx --enable-libglslang --enable-vulkan --enable-opencl --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc --enable-libilbc --enable-libgsm --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa --enable-libbs2b --enable-libflite --enable-libmysofa --enable-librubberband --enable-libsoxr --enable-chromaprint
libavutil 56. 70.100 / 56. 70.100
libavcodec 58.134.100 / 58.134.100
libavformat 58. 76.100 / 58. 76.100
libavdevice 58. 13.100 / 58. 13.100
libavfilter 7.110.100 / 7.110.100
libswscale 5. 9.100 / 5. 9.100
libswresample 3. 9.100 / 3. 9.100
libpostproc 55. 9.100 / 55. 9.100
[avi @ 00000221d8acf880] Stream #0: not enough frames to estimate rate; consider increasing probesize
Guessed Channel Layout for Input Stream #0.1 : stereo
Input #0, avi, from 'pipe:':
Duration: N/A, start: 0.000000, bitrate: N/A
Stream #0:0: Video: rawvideo, bgr24, 2560x1440, 60 fps, 60 tbr, 60 tbn, 60 tbc
Stream #0:1: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 22050 Hz, stereo, s16, 705 kb/s
Stream mapping:
Stream #0:0 -> #0:0 (rawvideo (native) -> h264 (libx264))
Stream #0:1 -> #0:1 (pcm_s16le (native) -> aac (native))
[libx264 @ 00000221d8ae6940] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
[libx264 @ 00000221d8ae6940] profile High 4:4:4 Predictive, level 5.1, 4:4:4, 8-bit
[libx264 @ 00000221d8ae6940] 264 - core 161 r3048 b86ae3c - H.264/MPEG-4 AVC codec - Copyleft 2003-2021 -
www.videolan.org/x264.html - options: cabac=0 ref=1 deblock=0:0:0 analyse=0:0 me=dia subme=0 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=6 threads=18 lookahead_threads=3 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=0 keyint=250 keyint_min=25 scenecut=0 intra_refresh=0 rc=crf mbtree=0 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=0
Too many packets buffered for output stream 0:0.
[libx264 @ 00000221d8ae6940] frame I:6 Avg QP:23.00 size:157911
[libx264 @ 00000221d8ae6940] frame P:1403 Avg QP:26.39 size: 56841
[libx264 @ 00000221d8ae6940] mb I I16..4: 100.0% 0.0% 0.0%
[libx264 @ 00000221d8ae6940] mb P I16..4: 23.8% 0.0% 0.0% P16..4: 33.0% 0.0% 0.0% 0.0% 0.0% skip:43.2%
[libx264 @ 00000221d8ae6940] coded y,u,v intra: 14.8% 0.1% 0.1% inter: 15.1% 0.2% 0.2%
[libx264 @ 00000221d8ae6940] i16 v,h,dc,p: 27% 25% 30% 19%
[libx264 @ 00000221d8ae6940] kb/s:27490.44
Conversion failed!
and the output is 0kb only wave is normal, no video...... I follwed the tutorial to setup some command but why...........
and the output is 0kb only wave is normal, no video...... I follwed the tutorial to setup some command but why...........
